Wikipédia

Dhaptar standar ISO

Ing ngisor iki pratélan standar ISO sing ana ing artikel Wikipedia. Kanggo pratélan pepak sing cacahé punjul 17500 ISO standard (taun of 2009), pirsani ISO Catalogue Archived 2008-08-28 at the Wayback Machine..

Watara 300 saka standard sing dasilaké déning ISO lan IEC Joint Technical Committee 1 (JTC1) wis cumepak gratis kanggo umum ing [1]

ISO 1–ISO 999 besut

  • ISO 1 Standard referensi temperatur kanggo spesifikasi lan verifikasi produk geometri
  • ISO 2 Tèkstil — Paugeran arah puteran benang lan prodhuk kagandhèng
  • ISO 3 Preferred number
  • ISO 4 Aturan kanggo cekakan tembung lan irah-irahan ing publikasi
  • ISO 7 Pipe threads where pressure-tight joints are made on the threads
  • ISO 9 Informasi lan dokumentasi — Transliterasi saka aksara Cyrillic menyang Roman — Basa Slavik lan non-Slavik
  • ISO 16:1975 Akustik — Standard tuning frequency (Standard musical pitch)
  • ISO 31 Kuantitas lan unit
  • ISO 65 Carbon steel tubes suitable for screwing in accordance with ISO 7-1[2]
  • ISO 68-1 ISO general purpose screw threads — Basic profile — Part 1: Metric screw threads[3]
  • ISO 128 Technical drawings — General principles of presentation
  • ISO 216 paper sizes, e.g. the A4 paper size
  • ISO 226 Phon based on Fletcher-Munson curves
  • ISO 228-1: Pipe threads where pressure-tight joints are not made on the threads — Part 1: Dimensions, tolerances and designation.
  • ISO 233:1984 Transliterasi saka Aksara Arab menyang Roman characters
    • ISO 233-2:1993 Transliterasi saka Aksara Arab menyang Roman characters — Part 2: Basa Arab — Simplified transliteration
  • ISO 259:1984 Documentation — Transliterasi saka Aksara Ibrani menyang Roman characters
    • ISO 259-2:1994 Transliterasi saka Aksara Ibrani menyang Roman — Part 2: Transliterasi prasaja
  • ISO 261 General purpose metric screw threads. General plan.
  • ISO 262 Selected metric-screw-thread sizes for screws, bolts, and nuts
  • ISO 361 Basic ionizing radiation symbol
  • ISO 500 Agricultural tractors — Rear-mounted power take-off
  • ISO 639 Kodhe basa
    • ISO 639-1 Kodhe basa — Part 1: Alpha-2 code
    • ISO 639-2 Kodhe basa — Part 2: Alpha-3 code
    • ISO 639-3 Kodhe basa — Part 3: Alpha-3 code for comprehensive coverage of languages
    • ISO 639-5
  • ISO/IEC 646 internationalized 7 bit ASCII variants
  • ISO 657 Hot-rolled steel sections
  • ISO 668 Specification for Shipping Containers
  • ISO 690 Réferènsi bibliografi
  • ISO 704
  • ISO 732 Fotografi — 120-size lan 220-size filems — Ukuran
  • ISO 764 Horology — Magnetic resistant watches
  • ISO 838 Standard for punching filing holes menyang paper
  • ISO 843:1997 Konversi saka Aksara Yunani menyang Roman
  • ISO 860
  • ISO 898 Mechanical Properties of Fasteners Made of Carbon Steel and Alloy Steel
    • ISO 898-1 Bolts, screws and studs with specified property classes—Coarse thread and fine pitch thread
    • ISO 898-2 Nuts with specified proof load values—Coarse thread
    • ISO 898-5 Set screws and similar threaded fasteners not under tensile stresses
    • ISO 898-6 Nuts with specified proof load values—Fine pitch thread
    • ISO 898-7 Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
  • ISO 965 General purpose metric screw threads — Toleransi
    • ISO 965-1 Principles and basic data
    • ISO 965-2 Limits of sizes for general purpose external and internal screw threads.
    • ISO 965-3 Deviations for constructional screw threads
    • ISO 965-4 Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H utawa G after galvanizing
    • ISO 965-5 Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
  • ISO 999 Guidelines for the content, organization, and presentation of indexes

ISO 1000–ISO 9999 besut

  • ISO 1000 SI units and recommendations for the use of their multiples and of certain other units
  • ISO 1004 Magnetic ink character recognition
  • ISO 1007 135 filem format
  • ISO/IEC 1539 Fortran programming language
  • ISO 1629 Establishes a system of terms and nomenclature for polymers
  • ISO 1745 Information processing — Basic mode control procedures for data communication systems
  • ISO 1750 Pesticides and other agrochemicals — Common names
  • ISO 1789 Medical vehicles and their equipment. Road ambulances
  • ISO/IEC 2022 Information technology: Character code structure and extension techniques
  • ISO 2108 International standard book numbering (ISBN)
  • ISO 2145 Numbering of divisions and subdivisions in written documents
  • ISO 2171 Cereals and milled cereal products — Determination of total ash
  • ISO 2281 Water-resistant watches
  • ISO 2533 Standard Atmosphere
  • ISO 2709 Format for information exchange (e.g. MARC)
  • ISO 3029 126 filem format
  • ISO 3082 Iron ores — Sampling and sample preparation procedures
  • ISO 3103 Method of brewing tea for the purpose of sensory tests
  • ISO 3166 codes for countries and subdivisions
  • ISO 3297 International standard serial number (ISSN)
  • ISO 3506 Mechanical properties of corrosion-resistant stainless steel fasteners.
  • ISO 3536 Road vehicles — Safety glazing materials — Vocabulary
  • ISO 3537 Road vehicles — Safety glazing materials — Mechanical tests
  • ISO 3538 Road vehicles — Safety glazing materials — Method for the determination of solar transmittance
  • ISO 3601 Fluid power systems — O-rings
    • ISO 3601-1 Inside diameters, cross-sections, tolerances and size identification code (Wis dimutakhiraké)
    • ISO 3601-2 Housing dimensions for general applications (Wis dimutakhiraké)
    • ISO 3601-4 Anti-extrusion rings (back-up rings) (Wis dimutakhiraké)
  • ISO 3602 Romanisasi basa Jepang
  • ISO 3632 Quality of Saffron
  • ISO 3635:1981 Size designation of clothes — Definitions and body measurement procedure
  • ISO 3864 Label kaslametan
  • ISO 3901 Kodhe rekaman standar internasional (International Standard Recording Code) (ISRC)
  • ISO 3977 Design and procurement standards for gas turbine system applications
  • ISO 4157 Subdivisi saka kerja konstruksi
    • ISO 4157-1: yasan lan péranganing yasan
    • ISO 4157-2: nomer kamar
    • ISO 4157-3: idhèntifikasi kamar
  • ISO 4179 Ductile iron pipes and fittings for pressure and non-pressure pipelines — Cement mortar lining
  • ISO 4217 Currency codes
  • ISO 4628 Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance
    • ISO 4628-1 : General introduction and designation system
    • ISO 4628-3 : Assessment of degree of rusting
  • ISO/IEC 4873:1991 8-bit code for information interchange
  • ISO 4892 Plastics—Methods of exposure to laboratory light sources
  • ISO 5167 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full
    • ISO 5167-1 Part 1: General principles and requirements
    • ISO 5167-2 Part 2: Orifice plates
    • ISO 5167-3 Part 3: Nozzles and Venturi nozzles
    • ISO 5167-4 Part 4: Venturi tubes
  • ISO 5218 Representation of human sexes
  • ISO 5455 Technical drawings: scales
  • ISO 5775 Bicycle tyres and rims
  • ISO 5800 Photographic Film speed
  • ISO 5964 Guidelines for the Establishment and Development of Multilingual Thesauri
  • ISO 5971:1981 Size designation of clothes — Pantyhose
  • ISO 6166 structure of an International Securities Identifying Number (ISIN)
  • ISO 6194 Rotary-shaft lip-type seals incorporating elastomeric sealing elements
    • ISO 6194-5 Identification of visual imperfections
  • ISO 6344 Coated abrasives — Grain size analysis
    • ISO 6344-1 Part 1: Grain size distribution test
    • ISO 6344-2 Part 2: Determination of grain size distribution of macrogrits P12 to P220
    • ISO 6344-3 Part 3: Determination of grain size distribution of microgrits P240 to P2500
  • ISO 6429 Information technology: Control functions for coded character sets
  • ISO 6438 Documentation — African coded character set for bibliographic information interchange
  • ISO 6579 Microbiological detection of Salmonella spp in food and animal feeding stuffs.
  • ISO 6594 Cast iron drainage pipes and fittings — Spigot series
  • ISO 6709 Standard representation of latitude, longitude and altitude for geographic point locations
  • ISO 6946 Building components and building elements — Thermal resistance and thermal transmittance — Calculation method
  • ISO 7001 Public Information Symbols
  • ISO 7002 Agricultural food products — Layout for a standard method of sampling from a lot
  • ISO 7098 Romanization of Chinese
  • ISO 7372 Trade data interchange
  • ISO/IEC 7501-1:1997 Kartu pengenal— Machine readable travel documents (Part 1: Machine readable passport; Part 2: Machine readable visa; Part 3: Machine readable official travel documents)
  • ISO 7736 Car radio installation space
  • ISO/IEC 7810 Kartu pengenal— Physical characteristics
  • ISO/IEC 7811 Kartu pengenal— Recording technique
  • ISO/IEC 7812 Kartu pengenal— Identification of issuers
  • ISO/IEC 7813 Tèknologi informasi — Kartu pengenal— Kartu transaksi finansial
  • ISO/IEC 7816 Kartu pengenal— Kartu sirkit kaintegrasi
  • ISO/IEC 7942 Graphical Kernel System
  • ISO 8090 Cycles — Terminologi
  • ISO 8180 Ductile iron pipelines — Polyethylene sleeving for site application
  • ISO 8373 Manipulating Industrial Robots — Vocabulary
  • ISO 8402 Quality Management and Quality Assurance — Vocabulary
  • ISO 8501-1 Preparation of steel substrates before application of paints and related products
  • ISO 8555 Sistem manajemen lingkungan.
  • ISO 8559:1989 Garment construction and anthropometric surveys — Body dimensions
  • ISO 8583 Financial transaction card originated messages — Interchange message specifications
    • ISO 8583-1 Part 1: Messages, data elements and code values
    • ISO 8583-2 Part 2: Application and registration procedures for Institution Identification Codes (IIC)
    • ISO 8583-3 Part 3: Maintenance procedures for messages, data elements and code values
  • ISO 8601 Date and time representation
  • ISO/IEC 8613 Open Document Architecture
  • ISO/IEC 8632 Computer Graphics Metafile
  • ISO 8651 Graphical Kernel System language bindings
  • ISO/IEC 8652: Information technology — Programming languages — Ada
  • ISO 8805 Graphical Kernel System for Three Dimensions and the C language bindings are ISO 8806.
  • ISO 8806-4 Graphical Kernel System for Three Dimensions, C language bindings
  • ISO 8807: Language Of Temporal Ordering Specification (LOTOS)
  • ISO/IEC 8824 Abstract Syntax Notation One (ASN.1)
  • ISO/IEC 8825 ASN.1 Encoding Rules
  • ISO 8859 8-bit coded character sets
  • ISO 8879 Standard Generalized Markup Language (SGML)
  • ISO 9000 Quality management system in production environments
  • ISO 9001 Quality management
  • ISO 9069 SGML support facilities — SGML Document Interchange Format (SDIF)
  • ISO/IEC 9075 SQL
  • ISO 9126 Software quality model
  • ISO 9141 Network interconnection of computers in a vehicle
    • ISO 9141-2 OBD-II standard, aka 9141 CARB standard
  • ISO 9241 Ergonomic requirements for office work with visual display terminals
  • ISO 9362 Bank Identifier Code utawa BIC system
  • ISO 9407 Shoe sizes
  • ISO/IEC 9541 Information technology — Font information interchange
    • ISO/IEC 9541-1:1991 Information technology — Font information interchange — Part 1: Architecture
    • ISO/IEC 9541-2:1991 Information technology — Font information interchange — Part 2: Interchange Format
    • ISO/IEC 9541-3:1994 Information technology — Font information interchange — Part 3: Glyph shape representation
  • ISO 9564 Banking — Personal Identification Number (PIN) management and security (in ATM and POS systems)
  • ISO/IEC 9579 Remote database access for SQL
  • ISO 9592, ISO 9593 PHIGS (Programmer's Hierarchical Interactive Graphics System)
  • ISO/IEC 9594 Information technology—Open Systems Interconnection -- ???
  • ISO 9660 CD-ROM file system
  • ISO/IEC 9796 Information technology — Security techniques — Digital signature schemes giving message recovery
  • ISO/IEC 9797 Information technology — Security techniques — Message Authentication Codes (MACs)
  • ISO/IEC 9798 Information technology — Security techniques — Entity authentication
  • ISO/IEC 9834 Information technology—Open Systems Interconnection -- ???
  • ISO 9869 Thermal insulation — Building elements — In-situ measurements of thermal resistance and thermal transmittance
  • ISO 9899 C programming language
  • ISO/IEC 9945 Portable Operating System Interface (POSIX)
  • ISO 9984 Konversi saka Georgian characters menyang Roman characters
  • ISO 9985 Konversi saka Armenian characters menyang Roman characters
  • ISO 9992:1999 Financial transaction cards — Security architecture of financial transaction systems using integrated circuit cards
  • ISO 9999 Technical aids for persons with disabilities. Classification and terminology

ISO 10000–ISO 19999 besut

  • ISO 10006 Quality management — Guidelines to quality in project management
  • ISO 10007 Quality management — Guidelines for configuration management
  • ISO 10012 Measurement management systems — Requirements for measurement processes and measuring equipment
  • ISO/IEC 10021 Message Oriented Text Interchange Systems (MOTIS)
  • ISO/IEC 10026 Open Systems Interconnection
  • ISO 10077 Thermal performance of windows, doors and shutters — Calculation of thermal transmittance
  • ISO/IEC 10089 Information technology; 130 mm rewritable optical disk cartridge for information interchange — 650 MB per cartridge
  • ISO 10160 Interlibrary Loan Application Service Definition — defines terminology used in interlibrary loan
  • ISO 10161 Interlibrary Loan Application Protocol
  • ISO/IEC 10164 Information technology—Open Systems Interconnection -- ???
  • ISO/IEC 10179:1996 Document Style Semantics and Specification Language (DSSSL)
  • ISO 10202:1991 Financial transaction cards — Security architecture of financial transaction systems using integrated circuit cards
  • ISO 10206 Extended Pascal (programming language)
  • ISO 10211 Thermal bridges in building construction — Heat flows and surface temperatures — Detailed calculations
  • ISO 10279 BASIC programming language
  • ISO 10303 Industrial automation systems and integration — Product data representation and exchange. Known as STEP, STandard for the Exchange of Product data
  • ISO 10383 Securities and related financial instruments — Codes for exchanges and market identification (MIC)
  • ISO 10487 Connections for passenger car stereos
  • ISO 10628 Flow diagrams for process plants
  • ISO 10646 Universal Character Set (equivalent to Unicode's character set)
  • ISO 10664 Hexalobular internal driving feature for bolts and screws — Torx screw head
  • ISO 10957 Information and documentation — International Standard Music Number (ISMN)
  • ISO 10962 Securities and related financial instruments — Classification of Financial Instruments (CFI code)
  • ISO 10993 Biological Evaluation of medical devices
    • ISO 10993-1:2008 Evaluation and testing within a risk management system
    • ISO 10993-2: Animal welfare requirements.
    • ISO 10993-3: tests for genotoxicity, carcinogenicity and reproductive toxicity.
    • ISO 10993-4: Selection of tests for interactions with blood.
    • ISO 10993-5: Test for in vitro cytotoxicity
    • ISO 10993-6:2007 Tests for local effects after implantation.
    • ISO 10993-7:2008 Ethylene oxide sterilization residuals
    • ISO 10993-8:
    • ISO 10993-9:2007 Framework for identification and quantification of potential degradation products.
    • ISO 10993-10: Tests for irritation and sensitisation
    • ISO 10993-11: Tests for irritation systemic toxicity
    • ISO 10993-12:2007 Sample preparation and reference materials.
    • ISO 10993-13: Identification and Quantification of degradation products from polymeric medical devices.
    • ISO 10993-14: Identification and Quantification of degradation products from ceramics.
    • ISO 10993-15: Identification and quantification of degradation products from un-coated utawa coated metals and alloys.
    • ISO 10993-16: Toxicokinetic study design for degradation products and leachables.
    • ISO 10993-17: Methods for the establishment of allowable limits for leachable substances using health-based risk assessment.
    • ISO 10993-18: Chemical characterisation of materials.
    • ISO 10993-19: Physico-chemical, morphological and topographical characterization of materials
    • ISO 10993-20:2006 Principles and methods for immunotoxicology testing of medical devices
  • ISO 11064 Ergonomic Design of Control Centres
    • ISO 11064-1:2000 Part 1: Principles for the design of control centres
    • ISO 11064-2:2000 Part 2: Principles for the arrangement of control suites
    • ISO 11064-3:1999 Part 3: Control room layout ISO 11064-3:1999/Cor 1:2002
    • ISO 11064-4:2004 Part 4: Layout and dimensions of workstations
    • ISO 11064-5:2008 Part 5: Displays and controls
    • ISO 11064-6:2005 Part 6: Environmental requirements for control centres
    • ISO 11064-7:2006 Part 7: Principles for the evaluation of control centres
  • ISO/IEC 11172 MPEG-1
  • ISO 11170:2003 Hydraulic fluid power — Filter elements — Sequence of tests for verifying performance characteristics
  • ISO/IEC 11179 Information Technology — Metadata Registries (MDR)
    • ISO/IEC 11179-1:2004 Part 1: Framework
    • ISO/IEC 11179-2:2005 Part 2: Classification
    • ISO/IEC 11179-3:2003 Part 3: Registry metamodel and basic attributes
    • ISO/IEC 11179-4:2004 Part 4: Formulation of data definitions
    • ISO/IEC 11179-5:2005 Part 5: Naming and identification principles
    • ISO/IEC 11179-6:2005 Part 6: Registration
  • ISO 11180 Postal addressing
  • ISO/IEC 11404:1996 Language-independent datatypes (Deleng uga General purpose datatypes)
  • ISO 11446:2004 Connectors for the electrical connection of towing and towed vehicles — 13-pole connectors for vehicles with 12 V nominal supply voltage
  • ISO 11469:2000 Plastics — Generic identification and marking of plastics products
  • ISO 11521 Replaced by ISO 15022
  • ISO/IEC 11578:1996 Information technology — Open Systems Interconnection — Remote procedure call (RPC)
  • ISO 11783 aka. IsoBus — J1939-based communication protocol for the agriculture industry.
  • ISO/IEC 11801 Information technology — Generic cabling for customer premises
  • ISO 11898 Road vehicles — Controller area network (CAN)
  • ISO 12006 Building construction. Organization of information about construction works.
  • ISO 12207 Software lifecycle processes.
  • ISO 12639 Graphic technology — Prepress digital data exchange — Tag image file format for image technology (TIFF/IT)
  • ISO 13239 High-level data link control (HDLC) procedures
  • ISO/IEC 13249 SQL multimedia and application packages
  • ISO/IEC 13250 Topic map
  • ISO 13346 Volume and file structure of write-once and rewritable médhia, which UDF is based on.
  • ISO 13370 Thermal performance of buildings — Heat transfer via the ground — Calculation methods
  • ISO 13406 Ergonomic requirements for work with visual displays based on flat panels
    • ISO 13406-1:1999 Part 1: Introduction
    • ISO 13406-2:1002 Part 2: Ergonomic requirements for flat panel displays
  • ISO 13407:1999 Human-centred design processes for interactive systems
  • ISO 13450 110 filem format
  • ISO 13485:2003 Medical Devices — Quality management systems — Requirements for regulatory purposes.
  • ISO 13490 Information technology: Volume and file structure of read-only and write-once compact disk médhia for information interchange
  • ISO 13567/1 to 3 Technical product documentation; Organization and naming of layers for Computer-aided design (CAD)
  • ISO/IEC 13568:2002 Information Technology — Z Formal Specification Notation — Syntax, Type System and Semantics
  • ISO 13616 Bank Account Numbers (IBAN)
  • ISO 13849-1 Safety of machinery, Safety related parts of control systems, General principles for design
  • ISO/IEC 13818 MPEG-2
  • ISO 13837 Road vehicles — Safety glazing materials — Method for the determination of solar transmittance
  • ISO 14000 Environmental Management Standards in production environments
  • ISO 14001 Environmental Management
  • ISO 14064 Greenhouse Gases
  • ISO 14230 Road vehicles — Diagnostic systems — Keyword Protocol 2000
    • ISO 14230-1 Physical layer
    • ISO 14230-2 Data link layer
    • ISO 14230-3 Application layer
    • ISO 14230-4 Requirements for emission-related systems
  • ISO/IEC 14443 Kartu pengenal— Contactless integrated circuit(s) cards — Proximity cards
  • ISO/IEC 14496 MPEG-4
  • ISO 14644 Standards Cleanrooms and associated controlled environments
  • ISO 14651 Information technology: International string ordering and comparison
  • ISO 14698 Standards Archived 2008-10-10 at the Wayback Machine.
    • ISO-14698-1 Bio-contamination Control — General Principles
    • ISO-14698-2 Evaluation & Interpretation of Bio-contamination Data
  • ISO 14750 Information technology — Open Distributed Processing — Interface Definition Language
  • ISO/IEC 14755 Input methods to enter unicode characters from ISO/IEC 10646
  • ISO 14855-1:2005 Aerobic Biodegradation under controlled composting conditions
  • ISO 14855-2:2007 Aerobic Biodegradation under controlled composting conditions with gravimetric measurement of carbon dioxid
  • ISO/IEC 14882 Programming Languages — C++
  • ISO 14915 Software ergonomics for multimedia user interfaces
    • ISO 14915-1:2002 Part 1: Design principles and framework
    • ISO 14915-2:2003 Part 2: Multimedia navigation and control
    • ISO 14915-3:2002 Part 3: Media selection and combination
  • ISO 14971:2007 Medical Devices — Application Of Risk Management To Medical Devices
  • ISO/IEC 14977 Extended Backus-Naur Form (EBNF)
  • ISO 15000 Electronic business eXtensible Markup Language ebXML
    • ISO 15000-1:2004 Part 1: Collaboration-protocol profile and agreement specification (ebCPP)
    • ISO 15000-2:2004 Part 2: Message service specification (ebMS)
    • ISO 15000-3:2004 Part 3: Registry information model specification (ebRIM)
    • ISO 15000-4:2004 Part 4: Registry services specification (ebRS)
    • ISO 15000-5:2005 Part 5: ebXML Core Components Technical Specification, Version 2.01(ebCCTS)
  • ISO 15022 Securities: Scheme for messages(Data Field Dictionary)
  • ISO 15082 Road vehicles — Tests for rigid plastic safety glazing materials
  • ISO 15099 Thermal performance of windows, doors and shading devices — Detailed calculations
  • ISO 15112 Natural gas — Energy determination
  • ISO 15189 Medical laboratories — Particular requirements for quality and competence
  • ISO 15288 Systems engineering — System life cycle processes
  • ISO 15289 Systems and software engineering — Content of systems and software life cycle process information products (Documentation)
  • ISO/IEC 15291: Information technology — Programming languages — Ada Semantic Interface Specification (ASIS)
  • ISO 15403 Natural gas — Natural gas for use as a compressed fuel for vehicles
    • ISO 15403-1 Designation of the quality
  • ISO/IEC 15408 Common Criteria — Evaluation Criteria for Information Technology Security
  • ISO/IEC 15434 Information technology — Automatic Identification and Data Capture Techniques - Syntax for High-Capacity ADC Media. For example: Data Matrix 2D barcode
  • ISO/IEC 15444 JPEG 2000
  • ISO/IEC 15445:2000 ISO HTML, a subset of Hypertext Markup Language (HTML) 4
  • ISO/IEC 15504 Framework for the assessment of software processes, also known as SPICE (Software Process Improvement and Capability Determination).
  • ISO 15614-13:2002 Specification and qualification of welding procedures for metallic materials-Welding procedure test
  • ISO 15686 Service life planning for constructive works in 10 parts
  • ISO 15693 Transponders
  • ISO 15706 International Standard Audiovisual Number
  • ISO 15707 International Standard Musical Work Code
  • ISO 15836 The Dublin Core metadata element set
  • ISO 15897 Standard for the registration of new POSIX locales and POSIX charmaps
  • ISO 15924 Codes for the representation of names of scripts
  • ISO 15930 Portable Document Format (PDF)
  • ISO/IEC 15948:2003 Portable Network Graphics (PNG)
  • ISO 15970 Natural gas — Measurement of properties — Volumetric properties: density, pressure, temperature and compression factor
  • ISO 15971 Natural gas. Measurement of properties. Calorific value and Wobbe index
  • ISO/IEC 16500 Generic Digital Audio-Visual Systems DAVIC
  • ISO 16071:2003 Ergonomics of human-system interaction, Guidance on accessibility for human-computer interfaces
  • ISO 16134 Earthquake- and subsidence-resistant design of ductile iron pipelines
  • ISO 16232 Road vehicles — Cleanliness of components of fluid circuits
    • ISO 16232-8 Particle nature determination by microscopic analysis
    • ISO 16232-9 Particle sizing and counting by automatic light extinction particle counter
    • ISO 16232-10 Expression of results
  • ISO/IEC 16262 ECMAScript
  • ISO 16549 Textiles — Unevenness of textile strands — Capacitance method
  • ISO 16750 Road vehicles — Environmental conditions and testing for electrical and electronics equipment.
  • ISO/TS 16949 Quality management systems — Particular requirements for the application of ISO 9001:2000 for automotive production and relevant service part organizations
  • ISO 16982:2002 Ergonomics of human-system interaction, Usability methods supporting human-centred design
  • ISO/IEC 17024:2003 specifies requirements for a body certifying persons against specific requirements, including the development and maintenance of a certification scheme for personnel
  • ISO/IEC 17025 General requirements for competence of test and calibration laboratories
  • ISO 17202 Textiles — Determination of twist in single spun yarns — Untwist/retwist method
  • ISO 17776 : Petroleum industries
  • ISO/IEC 17799 Information technology: Code of practice for information security management
  • ISO/IEC 17894 Ships and marine technology — Computer applications — General principles for development and use of PES in marine applications
  • ISO/IEC 18000 Information Technology AIDC Techniques-RFID (Radio Frequency Identification) for Item Management — Air Interface
    • 18000-1 Part 1 — Generic Parameters for the Air Interface for Globally Accepted Frequencies
    • 18000-2 Part 2 — Parameters for Air Interface Communications below 135 kHz
    • 18000-3 Part 3 — Parameters for Air Interface Communications at 13.56 MHz
    • 18000-4 Part 4 — Parameters for Air Interface Communications at 2.45 GHz
    • 18000-5 Part 5 — Parameters for Air Interface Communications at 5.8 GHz (Withdrawn)
    • 18000-6 Part 6 — Parameters for Air Interface Communications at 860 to 960 MHz
    • 18000-7 Part 7 — Parameters for Air Interface Communications at 433 MHz
  • ISO/IEC 18004: QR Code Standardization
  • ISO/IEC 18009: Information technology — Programming languages — Ada: Conformity assessment of a language processor (ACATS)
  • ISO/IEC 18014 Information technology — Security techniques — Time-stamping services
  • ISO/IEC 18023:2006(E) Information technology — SEDRIS —
  • ISO/IEC 18024-4:2006(E) Information technology — SEDRIS language bindings — Part 4: C Archived 2009-10-12 at the Wayback Machine.
  • ISO/IEC 18025:2005(E) Information technology — Environmental Data Coding Specification Archived 2013-01-13 at Archive.is (EDCS)
  • ISO/IEC 18026:2006(E) Information technology — Spatial Reference Model Archived 2009-06-15 at the Wayback Machine. (SRM)
  • ISO/IEC 18033 Information technology — Security techniques — Encryption algorithms
    • Part 1: General
    • Part 2: Asymmetric ciphers
    • Part 3: Block ciphers
    • Part 4: Stream ciphers
  • ISO/IEC 18041-4:2005(E) Information technology — EDCS language bindings — Part 4: C Archived 2010-07-04 at the Wayback Machine.
  • ISO/IEC 18042-4:2006(E) Information technology — Spatial Reference Model (SRM) language bindings — Part 4: C Archived 2009-10-12 at the Wayback Machine.
  • ISO 18152:2003 Ergonomics of human-system interaction, Specification for the process assessment of human-system issues
  • ISO 18185: Wireless standard for electronic seals using active RFID (Radio Frequency Identification)
  • ISO 18245 standard concerning the assignment of Merchant Category Codes (MCC) in retail financial services
  • ISO 18529:2000 Ergonomics of human-system interaction, Human-centred lifecycle process descriptions (available in English only)
  • ISO 18629 standardized Process Specification Language (PSL).
  • ISO 19005 PDF
  • ISO 19011 standard providing guidelines for quality and environmental management systems auditing
  • ISO 19092-1 Financial Services — Security — Part 1: Security framework
  • ISO 19092-2 Financial Services — Security — Part 2: Message syntax and cryptographic requirements
  • ISO 19101 Geographic Information: Reference model
  • ISO 19105 Geographic Information: Conformance and testing
  • ISO 19107 Geographic Information: Spatial schema
  • ISO 19108 Geographic Information: Temporal schema
  • ISO 19109 Geographic Information: Rules for Application Schema
  • ISO 19110 Geographic Information: Feature cataloguing methodology
  • ISO 19111 Geographic Information: Spatial referencing by coordinates
  • ISO 19111 Geographic Information: Spatial referencing by identifier
  • ISO 19113 Geographic Information: Quality principles
  • ISO 19114 Geographic Information: Quality evaluation procedures
  • ISO 19115 Geographic Information: Metadata
  • ISO 19123 Geographic Information: Coverage schema
  • ISO 19128 Geographic Information: Web Map Service
  • ISO 19131 Geographic Information: Data product specification
  • ISO 19136 Geographic Information: Geography Markup Language
  • ISO 19439 Framework for enterprise modelling
  • ISO 19440 Constructs for enterprise modelling
  • ISO/IEC 19501 Unified Modeling Language (UML)
  • ISO/IEC 19502 Meta-Object Facility (MOF)
  • ISO/IEC 19503 XML Metadata Interchange (XMI)
  • ISO/IEC 19757 Document Schema Definition Languages (DSDL)
  • ISO/IEC 19770 Information technology — Software asset management
  • ISO/IEC 19785 Common Biometric Exchange Formats Framework (CBEFF 2.0)
  • ISO/IEC 19790 Security requirements for cryptographic modules (see also FIPS 140)
  • ISO/IEC 19794 Information technology — Biometric data interchange formats

ISO 20000–ISO 29999 besut

  • ISO/IEC 20000:2005 IT Service Management System (based on BS15000)
  • ISO 20022 Financial Services — universal financial industry message scheme
  • ISO/IEC TR 20943 Information technology — Procedures for achieving metadata registry content consistency
    • ISO/IEC TR 20943-1:2003 Part 1: Data elements
    • ISO/IEC TR 20943-3:2004 Part 3: Value domains
  • ISO 21482 Ionizing-radiation warning -- Supplementary symbol
  • ISO 22000 Food safety management systems — Requirements for any organization in the food chain
  • ISO/TS 22003 Food safety management systems — Requirements for bodies providing audit and certification of food safety management systems
  • ISO 22241 : Diesel engines — NOx reduction agent AUS 32
    • ISO 22241-1 : Quality requirements
    • ISO 22241-2 : Test methods
    • ISO 22241-3 : Handling, transportation and storing
  • ISO/IEC TR 22250 Regular Language description for XML — (RELAX)
    • ISO/IEC TR 22250-1:2002 RELAX Core
  • ISO/PAS 22399:2007 Social security — Guideline for incident preparedness and operational continuity management
  • ISO 22716:2007: Cosmetics.
  • ISO/IEC 23270:2003 C# Programming Language
  • ISO/IEC 23360 Linux Standard Base (LSB) core specification 3.1 (in publication as of 2005-12)
    • ISO/IEC 23360-1 — Part 1: Generic specification
    • ISO/IEC 23360-2 — Part 2: Specification for IA32 architecture
    • ISO/IEC 23360-3 — Part 3: Specification for IA64 architecture
    • ISO/IEC 23360-4 — Part 4: Specification for AMD64 architecture
    • ISO/IEC 23360-5 — Part 5: Specification for PPC32 architecture
    • ISO/IEC 23360-6 — Part 6: Specification for PPC64 architecture
    • ISO/IEC 23360-7 — Part 7: Specification for S390 architecture
    • ISO/IEC 23360-8 — Part 8: Specification for S390X architecture
  • ISO 23733 Textiles — Chenille yarns — Test method for the determination of linear density
  • ISO 23950 Library standard ANSI/NISO Z39.50 — Protocol for searching and retrieving information, usually from bibliographic records
  • ISO/IEC 24727 Kartu pengenal— Integrated Circuit Card Programming Interfaces
    • ISO/IEC 24727-1 — Part 1: Architecture
    • ISO/IEC 24727-2 — Part 2: Generic card interface
    • ISO/IEC 24727-3 — Part 3: Application interface
    • ISO/IEC 24727-4 — Part 4: API Administration
    • ISO/IEC CD 24727-5 — Part 5: Testing
    • ISO/IEC FCD 24727-6 — Part 6: Registration authority procedures for the authentication protocols for interoperability
  • ISO/IEC 24744:2007 Software Engineering — Metamodel for Development Methodologies
  • ISO/IEC 24762:2008 Information technology — Security techniques — Guidelines for information

and communications technology disaster recovery services

ISO 30000–ISO 39999 besut

ISO 80000 besut

Deleng uga besut

Réferènsi besut

  1. ↑ Freely Available Standards
  2. ↑ http://www.iso.org/iso/iso_catalogue/catalogue_tc/catalogue_detail.htm?csnumber=3703
  3. ↑ http://www.iso.org/iso/iso_catalogue/catalogue_tc/catalogue_detail.htm?csnumber=3707
  4. ↑ ISO 29119 Software Testing standard

Pranala njaba besut

Dijupuk saka "https://jv.wikipedia.org/w/index.php?title=Dhaptar_standar_ISO&oldid=1655706"